Press
- Press Releases 2012
- Press Releases 2011
- Press Releases 2010
- Press Releases 2009
- Press Releases 2008
- Press Releases 2007
- Press photos 2012
- Press Photos 2011
- Contact
Homepage
Fazit der Aussteller
Aussteller vermelden Aufträge und hervorragende Kontakte[more]
Auf der EuroMold 2008 konnten zahlreiche Aussteller aus unterschiedlichen Branchen bereits während der Messe sehr gute Geschäftskontakte und zahlreiche Vertragsabschlüsse vermelden. Die EuroMold bietet gerade in wirtschaftlich schwierigen Zeiten...
After-show report
The 15th EuroMold closed its gates on Dec. 6, 2008, and had for four days hosted 58,842 from 87 countries[more]
The 15th EuroMold closed its gates on Dec. 6, 2008, and had for four days hosted 58,842 from 87 countries. That means, the proportion of international attendees has grown in comparison to last year’s EuroMold. In total EuroMold 2008 greeted 19,535...
58.842 trade visitors
58.842 trade visitors World - Premiere within Rapid Prototyping - Numerous conclusion of contracts[more]
The 15th EuroMold closed its gates on Dec 6, 2008, and had for four days hosted 58.842 trade visitors. At the 15th jubilee of the World Fair for Moldmaking and Tooling, Design and Application Development, which was inaugurated by Prof. Hans-Olaf...
Huntsman Advanced Materials gewinnt EuroMold AWARD 2008
Weltpremiere im Bereich Rapid Manufacturing[more]
Huntsman Advanced Materials ist der Gewinner des diesjährigen EuroMold-AWARDS. Das Unternehmen konnte sich mit seiner „Araldite Digitalis 360 Micro Light Fabrication“ in einem Feld von insgesamt 20 EuroMold-AWARD-Teilnehmern durchsetzen. Die...
Inauguration
EuroMold 2008 with 1523 Exhibitors from 38 Countries[more]
The 15th EuroMold exhibition opens today, December 3, 2008, and will run until December 6th, in the Exhibition Centre Frankfurt / Main. On the occasion of its 15th anniversary, the world fair for the tool- and mold-making industries, design, and...
Eröffnung der EuroMold 2008 durch Prof. Hans-Olaf Henkel
Offizieller Eröffnungsredner der 15. EuroMold ist Prof. Hans-Olaf Henkel[more]
Offizieller Eröffnungsredner der 15. EuroMold ist Prof. Hans-Olaf Henkel. Die Eröffnungs-Pressekonferenz der EuroMold und turntec 2008 findet am 03. Dezember von 10.30 Uhr bis 12.15 Uhr im Saal Europa, Halle 4.0 auf dem Messegelände Frankfurt / Main...
Asiamold exhibitors
Asiamold exhibitors expect Chinese Industry on a higher level[more]
Asiamold exhibitors expect Chinese Industry on a higher level than before. Due to the Chinese economic policy, which is focussed on the automotive industry, a strong Moldmaking and Tooling Industry will play a decisive role. China experts agree on...
Formula Student
EuroMold supports prospectivce Racing Car-Designers[more]
By supporting the worldwide construction competition Formula Student EuroMold displays its connection to innovations and latest technologies. EuroMold not only presents the construction workshop at December 6, 2008 but also supported the Formula...
Business & Design Area
New Format „Business + Design Area“ in Hall 6.1[more]
With the innovative “Business + Design Area” this year’s EuroMold, December 3 – 6, 2008, supports the dialogue between designers and manufacturers. The World Fair for Moldmaking and Tooling, Design and Application Development recognises the growing...
60,000 visitors expected
More than 60,000 trade visitors are expected - Host Country India[more]
This year’s EuroMold - World Fair for Moldmaking and Tooling, Design and Application Development - will take place Dec. 3-6, 2008, Frankfurt Exhibition Centre. About 1,700 exhibitors from 45 nations and more than 60,000 trade visitors from about 80...
Asiamold - mehr Service
Zweite Asiamold bietet breites Rahmenprogramm und verstärkten Service[more]
In wenigen Wochen öffnet die zweite Asiamold ihre Pforten. Die Messe für Werkzeug- und Formenbau, Design und Produktentwicklung findet vom 24. – 26. September 2008 auf dem größten Messeplatz Asiens – in Guangzhou / China – statt. Die Anzahl der...
RosMould - Increase by 110 percent
EuroMold Pavilion at RosMould – Increase by 110 percent[more]
At RosMould 2008, fair for Moldmaking and Tooling, EuroMold Pavilion’s exhibition space has expanded by 110 percent. From June 17–19, 2008, 18 medium-sized businesses from Germany, Austria and Hungary took part at the second EuroMold Pavilion in...
RosMould - Pavillion ausgebucht
EuroMold Pavilion auf der RosMould ausgebucht[more]
Bereits zwei Monate vor Messebeginn ist der EuroMold Pavilion auf der diesjährigen RosMould ausgebucht. 2007 organisierte die DEMAT GmbH zum ersten Mal den EuroMold Pavilion auf der RosMould. Der Erfolg des ersten EuroMold Pavilion aus dem Jahr 2007...
Pavilion Die & Mould India
Erfolg des EuroMold Pavilions auf der Die & Mould India[more]
Die Wirtschaftsmetropole Bangalore ist die am schnellsten wachsende Stadt des indischen Subkontinents, das indische Zentrum der IT-Industrie, der Luft- und Raumfahrtindustrie sowie des Maschinen-, Werkzeug- und Formenbaus.
Im Herzen dieser...
RosMould
Russland – ein vielversprechender Markt[more]
„Präsenz zeigen“ ist der Weg zum Erfolg auf jedem Wachstumsmarkt – so auch in Russland. Der Veranstalter der EuroMold, die DEMAT GmbH, verfolgt auch in diesem Jahr das Ziel, den Standort Europa in den Bereichen Werkzeug- und Formenbau, Design und...
Asiamold wächst
Zweite Asiamold in Guangzhou, China: Ausstellerzahl und Fläche verdoppeln sich[more]
Die Dimensionen der vom 24. – 26. September 2008 in Guangzhou, China, stattfindenden Asiamold verdoppeln sich: 400 Aussteller und 12.000 Besucher werden auf einer Ausstellungsfläche von 20.000 Quadratmeter erwartet. Damit stehen die Vorzeichen...
Mold & Die Center
Mold & Die Center verbindet Projektpartner auch über die EuroMold hinaus[more]
Am Anfang stand eine Idee und viel Engagement und Teamgeist! Dreißig Unternehmen haben das fast Unmögliche geschafft und innerhalb von nur wenigen Monaten das EuroMold-Konzept „Vom Design über den Prototyp bis zur Serie“ anhand der „Koralle“ zum...